A2 FR Core Metal Aluminum Composite Panels
Product origin :Henan
Delivery time :30 days
Supply capacity :3000 tons/month
1.A2 FR Core Metal Aluminum Composite Panels with ultra-light and super strong structure, in the design of larger size plates, regardless of the curtain wall or ceiling in the back of the framework of the gap can be expanded, in addition to the panel itself the price advantage, but also can save the cost of keel and labor costs up to more than one-third, as well save construction time.
2.A2 FR Core Metal Aluminum Composite Panels due to a special three-dimensional structure, lining ribs
should be used only T-BAR, economic and convenient.
The aluminum layer of A2 FR Core Metal Aluminum Composite Panels use the roller coating or continuous anodizing process,
the A2 FR Core Metal Aluminum Composite Panels surface delicate exquisite,the appearance of a variety of options, whether imitation stone, imitation wood
or brushed, mirror, can be perfect Show.
Suitable for the large-scale project
At present in the domestic market , more than 90% of the aluminum corrugated panel and aluminum
honeycomb board are made of sheet production process. Generally speaking, the daily production
capacity is only about 500㎡. Because of rely on the artificial production, the yield of finished products
is low and the quality is different. Take a single project of 10,000㎡ as an example, excluding the
preparation period,the production cycle on the need for more than 20 days ( and must work overtime
day and night）
A2 FR Core Metal Aluminum Composite Panels is worth noting that our aluminum core composite
panels are manufactured continuously by automation equipment with high yield and uniform quality.
The production cycle also takes only two to three days (no overtime work required). Therefore, in the
face of larger demand for large-scale projects,it can be quickly delivered.
Aluminum core composite panel installation and processing
First of all, A2 FR Core Metal Aluminum Composite Panels according to the required slot width,
fixed the plate, and then adjust the depth of the cutting tool, the depth of cut must see the
original aluminum finish and then push at a uniform speed, can not be suddenly fast or slow,
otherwise likely to cause the groove surface is not smooth.
Slotted must see the the original surface of the aluminum plate, otherwise it will affect the surface
of coating at the bend (such as burst paint, cracking phenomenon), the groove surface shall not be
residual any core aluminum, it will cause convex surface at the bend.
A2 FR Core Metal Aluminum Composite Panels Folding the Slotted edge gently by hand, the speed
can not be too fast, otherwise it will affect the bending surface quality.